1. News
  2. Alerts
  3. D-Link · Security flaws
AlertD-Link · Security flaws2 min read

D-Link warns of unpatched flaws in business network switches

D-Link says its DGS-3130 business network switches have unpatched security flaws, so owners should apply the company's temporary protections now.

By the Dashline deskSource: BleepingComputer
D-Link warns of unpatched flaws in business network switches
Photo: Pmauduit, CC BY-SA 3.0
Act this week
What happenedD-Link disclosed several unpatched flaws in its DGS-3130 series switches and shared temporary protections while it works on a fix.
Who is affectedBusinesses and network administrators using D-Link DGS-3130 series managed switches, especially the DGS-3130-30TS model.
What to do
  1. 1Turn off the D-Link Discovery Protocol (DDP) on affected switches.
  2. 2Remove default or unneeded SNMP community strings.
  3. 3Limit SSH, web and SNMP access to an isolated management network and approved admin computers.
  4. 4Keep offline backups of switch settings and watch logs for unexpected changes, reboots or factory resets.

D-Link has warned that several of its DGS-3130 series business network switches have security flaws with no fix available yet. The company has shared temporary protections while it works on new firmware.

What happened

A switch is the box that connects computers and other devices inside an office network. The DGS-3130 series is built mainly for small and mid-size businesses. Researcher Giresh Kumar Enugu of Spectrum Community Solutions found the bugs in the D-Link Discovery Protocol (DDP), a feature of these switches.

An attacker who already has access to the network could pull sensitive device data, change settings or credentials, leak SNMP community strings, or cause outages and resets. SNMP community strings work like shared passwords for network management tools.

Who it affects

The confirmed problems are in several firmware versions of the DGS-3130-30TS model. D-Link is still checking other switch models and parts of the firmware's security design. If your business does not use these switches, there is nothing to do here.

What to do

The alert box above lists the steps. The first is to turn off DDP, which D-Link calls the main known way in. The others limit who can reach the switch and help spot trouble early.

What happens next

Several things are not yet known. D-Link has not shared technical details, has not published tracking numbers (CVE IDs) for the flaws, and has not said when the fix will arrive. Watch D-Link's notices for new firmware. In September, D-Link also warned of a separate unpatched flaw in older DIR-822A routers.

The takeaway

If your business runs D-Link DGS-3130 switches, turn off DDP and lock down management access now, then watch for D-Link's firmware fix.

More articles

You should really read these.

Next step

Let’s talk